This Is The History Of Saab 9-3 Key Replacement In 10 Milestones

How to Replace the Replacement Key Battery For the saab replacement key 9-3

Saab owners have to follow a series of specific steps to add a second ignition key. It requires dealer assistance using a handheld computer called Tech-2. Then, a new transponder and key have to be purchased.

Change your keys regularly to prevent one from deteriorating faster than the next. This will help to keep your keys in top condition.

Replacement Case

Contrary to the classic Saab keys of old keys, the modern key fobs contain electronics that make it difficult to duplicate. This has made stealing car keys much more difficult than it was twenty years ago. However, it has also made replacing Lost Saab Keys keys a comparatively expensive undertaking.

Saab 9-3 owners should have two working keys. It costs a fortune to replace a lost key, as it requires replacing the CIM module, and reconfiguring the locking cylinders. Dealers charge between $100-$200 to do this.

There are several ways to get around these expensive. Some parts dealers will use the code of an extra key to cut a new metal blade at a fraction the price of the dealer. The key must be exactly the same as the original to allow it to work in your vehicle.

Follow these steps to replace the case. You'll need an open-faced screwdriver and a lot of patience. With the screwdriver, Lost Saab Keys you can pry away the plastic and take out the emergency key. Once the case has been opened take the electronics out and place them in the new case. Put the correct key and badge inside the case.

Replacement Battery

The Saab 9-3 replacement battery is a budget component that can be quickly and easily replaced. Cyclone's YouTube video Cyd shows how to replace the remote fob battery in only four steps. This tutorial can be used with any modern Saab key fob. However, the process may differ slightly.

The first step is to find the button that opens the backup key in the fob. This button is usually located next to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the small hole in this button. This will allow you to open the case of the fob so that you can replace the battery.

After the new battery CR1632 is installed it is possible to reassemble the remote key fob and then program it to your car. The entire process should not take more than an hour, if not less. It is a very simple procedure that doesn't require any special equipment.

The process is a bit more complicated if you lose the key, but it's possible. The dealer has to first verify the VIN of the vehicle and order the replacement TWICE module as well as key blade with the proper unique code. The dealer will then have to program the key using MDI, a new software tool.

Replacement Key Fob

The key fob is the device that locks and unlocks your car. It is equipped with batteries inside. Batteries have a limited lifespan and will eventually die. This is a typical issue that occurs with all vehicles and the good thing is that you can change the batteries in most key fobs and not have to replace the entire case. Amazon sells replacement fobs that have all the electronics in place. It is easy to open the case and replace the batteries. It is important to keep in mind that you'll need to take out the emergency key first, and you can do this by inserting the screwdriver of a small flathead into the slot that is located in the middle of the case. Work the screwdriver around the case, and it will split open, making it simple to remove.

If you are about to replace the keys, ensure you have a spare, as this will reduce the total cost by a significant amount. If you have a spare you can request that the dealer cut the new key and program it to the car, which is cheaper than replacing the entire key fob.

If you don't have a spare, it is possible to add an additional key to your car, however it requires a lot of research and effort. It costs a few hundred bucks to add a second car key. The computer in the vehicle must also be programmed. Professionals can do this however, it's a costly option.

Replacement Ignition

The new SAAB 9-3 is an alarm system that is more sophisticated built on a keycode. If you lose your only key, it could be costly to replace it with another one because the car must be equipped with a specific computer and also be programmed to accept a new key. Most locksmiths cannot do this, and even dealers can charge several hundred dollars to program the new key!

If you've lost the only working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge you the highest price for it. We can reprogramme the existing EEPROM on your car's computer so that it's ready to accept an additional key. This will save you more than 50% on what you would spend at the dealer.

If you've been a long-time owner of an 03-11 SAAB 9-3, then you likely know that the ignition key isn't very durable. They can get extremely sticky, and the buttons can fall off at times, so you should consider purchasing a new one if yours isn't performing as it should. It's not as difficult as you think to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.