Why Kia Picanto Key Fob Replacement Is So Helpful During COVID-19

How to Replace a Kia Sportage replacement key for kia sportage Key

For a variety of kia flip key repair models, the key contains an integrated keyless entry system. This key is similar to remote controls and can be exchanged with an Kia dealer.

Key fobs can stop working due to a variety of reasons, including batteries that are dead worn buttons or buttons, water damage, signal interference and a malfunctioning receiver module. Here are some tips to assist you in getting your Kia key fob that is a replacement for the sportage again.

how much Is a kia Key Fob do you replace the remote key or the smart key?

If your Kia is equipped with an intelligent key, remote key, push to start key, or a regular non-transponder metal key The battery inside these keys will eventually require replacement. This is especially in the event that your car displays a message indicating that the smart key or remote has a low battery.

It's quite simple to do. To replace the battery in the keyfob remove your mechanical key from the slit on the back of the fob. Then, pull the cover open. A small screw will be inside the key fob to hold the battery in place. With a small screwdriver, unscrew the screw and remove the old battery. Then, you can insert the new battery and close the slit in the key fob.

When the key fob is equipped with a fresh battery Test it by pressing the locks and unlock buttons. You're good to go when the doors lock or unlock as expected. You can now utilize the hands-free feature to lock and unlock your Kia whenever your fingers feel cold or when you need to do some errands in Brandon.

Note: Some key fobs (transponder chip or smart keys) might require their programming completed. This requires a programing machine which is available to the automotive locksmith or dealer. Other keys (non-transponder metal keys) do not require programming. If your keys need to be reprogrammed, then you will need to be aware of the key code number written on the key code tag and record it in a safe place.

How do you replace the battery?

If the Kia key fob is unable to respond to pressing the lock or unlock button, it's likely that the battery is not fully charged. A battery that is not functioning properly could cause other issues like the check engine light coming on or the engine not cranking. Fortunately, replacing the battery on the key fob is a simple DIY task that requires only the most basic tools.

Make sure that you shut off your vehicle and close all doors before you begin. Find the small metal or plastic piece that is on the bottom of your key fob, and gently jiggle it until the metal key pops out. This key can be put into the door's driver handle to unlock your car.

To replace the key fob battery, remove the cover on the rear and use a plier bar tool to loosen the latch that holds the black negative battery cable. Remove the old battery, and then position the new battery to ensure its "+" side faces you and the "-" negative side is facing the fob's electrical contacts. Push the new CR2032 battery straight into position, avoiding excessive force to avoid damaging or breaking the contacts made of metal.

After you have installed the new battery then turn the key fob on and off in the ignition until the door locks cycle. You can then test your Kia's key fob again to confirm that it's working as intended.

How do you replace the smart key

There is a possibility of having a standard keyfob or a Smart Key based upon the model of Kia Sportage. The smart key has an embedded mechanical key blade, while the standard key fob does not. Both key fobs contain an internal battery that will eventually require replacing. Luckily, this is an easy task that takes just two minutes.

Make sure to shut off your Kia and be on a level or well-lit surface prior to when you begin. Be aware that the fob is made up of small pieces that could be thrown off should you not be careful.

The first step is to find the small release button that is located on the lower backside of the fob. This will be either a circular or rectangular slot. You can open the key fob by pressing the button.

Once you have the key fob opened and you are able to remove the old battery and replace it. The new battery should be a CR-2032 and can be purchased online or at your local auto parts store. After you've finished it should be possible to lock or unlock your car using your key fob even if your engine isn't running!

How do I replace the mechanical key?

The Kia keyfob is a wonderful convenience that lets us lock or unlock our car simply by pressing one button. But, as with all devices there are issues with it from time to time. There are ways to address these issues and keep your key fobs working for many years.

A dead or low-quality battery is one of the most common issues. This can cause your fob to stop working or operate intermittently. If this is the case you should replace the battery with a new one.

If this isn't enough to resolve the issue Try using a standard flathead screwdriver and wedge it into the fob's plastic casing. Be careful not to harm any internal components or scratch the plastic. Once the battery is removed and replaced with a brand new one.

When the new battery is in, close and then open the doors using the mechanical key (every Kia fob has an emergency mechanical key that can fit in the slot). Test the key fob to ensure it's functioning properly. Contact a dealer or a locksmith to address the issue in the event that the key fob is not working. Make sure they make you an emergency key that works for all trunk and door cylinders, to avoid lockouts again.